SAVE
17%
Related Product
$899.00
Mini Maxx V2 Race Tuner | DPF Delete Tuner
Tuner depot recommends this tuner for those looking for the most cost-effective delete tuner that will run clean, smoke-free tunes and provide a little extra performance. For those looking for more power, we recommend one of our custom-tune tuners. Please reach out to our sales team for more information.
The Mini Maxx is one of the best (and most affordable!) delete tuners available. The Mini Maxx DPF delete race tuner comes pre-loaded with tunes for a variety of different trucks, making it a great choice for those looking to do a DPF, DEF, and EGR delete.
If you're looking for a tuner that will allow you to delete all of your emission components while ensuring that you don't have any check engine lights or DTCs (diagnostic trouble codes), the Mini Maxx is the tuner for you. The device comes preloaded with tunes.
Introducing the next generation of diesel downloaders from that offers everything a diesel owner could want, all in one high-tech unit.
What kind of diesel trucks could be deleted by the Mini Maxx tuner?
- 2007.5-2017 Dodge RAM & 6.7L Cummins
- 2008-2019 Ford Powerstroke 6.4L & 6.7L
- 2007.5-2016 GM Duramax 6.6L*
*Please note: 2013-2021 RAM trucks only have one power level, new power tunes are in the works and will be updated in the future. This tune is limited to 20PSI*
*LML Duramax do not register boost levels, a fix is being worked on* (MAP sensor not being read). Dual fuel tanks on Cab & Chassis are not supported. LGH trucks are not supported*
Please see here for all known issues BEFORE ordering
Performance Mini Maxx Race Tuner and Fuel Economy
The Mini Maxx is a great option for those drivers looking to save on fuel. Most truck owners who installed the Mini Maxx have reported a substantial increase in mpg, sometimes up to 5 miles per gallon when paired with the correct DPF delete pipe and EGR block-off kit. Installing the Mini Maxx is simple and is among the fastest ways to remove all the emissions restrictions.
People using the Mini Maxx never look back.
Is it legal to have a Mini Maxx Tuner installed in your truck? What about the emissions?
Please note that the Mini Maxx race tunes are designed for off-road use only.
If you live in a country without such requirements, the Mini Maxx is a great option for tuning your truck cheaply.
What does a Mini Maxx Tuner do?
The Mini Maxx tuner is a device that is used to improve the performance of diesel engines. It does this by increasing the power and torque of the engine, as well as improving the fuel economy. The Mini Maxx tuner is available for Ford, Dodge, and GM trucks. It can be installed in just a few minutes, and it is easy to use.
By installing this state-of-the-art DPF delete race tuner you will be able to delete the following emission systems:
DPF: Diesel Particulate Filter
Easily delete the components of your DPF system. The Mini Maxx allows you to remove all the components of your truck's DPF system while turning off all the codes for the related sensors, eliminating any check engine lights.
EGR: Exhaust Gas Re-circulation
Mini Maxx v2 disables the EGR function and any related check engine lights and DTCs.
It will work if you leave the EGR system installed (run with the EGR system) and it will also work if you install an EGR block kit. Works in conjunction with an EGR block.
No more leaks from the EGR system! Yes say goodbye to coolant leaks from the EGR!
DEF: Diesel Exhaust Fluid
This tuner will allow you to turn your urea injection system off completely, which will allow you to remove the tank and all related sensors. This is a great option for those that want to remove the extra weight from their vehicle or those that are having problems with the system.
Note: ULSD (Ultra-Low Sulfur Diesel) is not required if you have the Mini Maxx installed on your truck. You can now feel safe using high sulfur diesel, something that will make you happy if you live in an area where it is hard to find ultra-low sulfur diesel fuel.
Mini Maxx offers the flexibility of turning your truck into a more capable and economical vehicle.
Mini Maxx comes with:
- Delete tuner
- OBD Connection box
- HDMI Cable to run from the connection box to the tuner
- Power adapter
- Micro SD to USB Adapter
- Fuse tap
- Suction cup mount
- USB cable
- Mini Maxx emission removal tunes
- This tuner is ONLY for deleted trucks, there is no option to run emissions.
- Tunes for off-road & race use only***
Mini Maxx DPF DeleteRace Tuner Features:
- Allows removal of the DPF system and ALL related sensors (nothing needs to go into the race exhaust)
- Remove / Adjust top speed limiter
- Speedometer recalibration for use of non-stock size tires or gearing
- Allows removal of the entire EGR system including cooler with no trouble codes
- Turn off EGR without removing ANY parts
- Read / Clear Diagnostic Trouble Codes
- Internet updateable with included SD Memory Card and USB Cable
- Digital gauges to monitor 20+ parameters
How to update the Mini Maxx Tuner?
You can find any available updates for your device here. Instructions on installing the Mini Maxx are also available on the manufacturer's website.
Check for Mini Maxx delete updates for Dodge Cummins (6.7l Cummins), 6.4l Powerstroke, etc
| MODEL | YEAR |
C&C SUPPORT | SOTF |
TRANS SUPPORT |
| Duramax 6.6L (2500-5500) | 07.5-10 | Y | Y | A & M |
| Duramax 6.6L (2500-5500) | 11-16 | Y | N |
ALL |
| Powerstroke 6.7L (F250-F550) | 08-10 | Y | Y | A & M |
|
Powerstroke 6.7L (F250-F350) |
11-16 | N | Y |
ALL |
| Powerstroke 6.7L (F250-F350) | 17-19 | N | N | ALL |
| Cummins 6.7L (RAM 2500-5500) | 07.5-09 | Y | Y | ALL |
| Cummins 6.7L (RAM 2500-3500) | 10-12 | N | Y | ALL |
| Cummins 6.7L (RAM 2500-5500) | 13-17 | Y | Y |
ALL |
| Cummins 6.7L (RAM 2500-5500) | 18-21 | Y | Y |
ALL |
*C&C = Cab & Chassis
*SOTF = Shift On The Fly (switch power levels without reflashing the PCM)
*2018-2021 RAM trucks include a BYPASS CABLE
Please see here for all known issues BEFORE ordering
*Stock pyro will not work, you can add a BD Pyrometere kit here.
$899.99
EFI Live Autocal V3 with custom tuning
With 512MB storage for tune and log files and file transfer times up to 10 times faster than AutoCal V2, AutoCal V3 delivers significant hardware advancements to the tuning market.
AutoCal V3's built-in USB drivers, field upgradeable firmware, and custom menu system make supporting remote customers a breeze.
Supporting GM, Dodge Cummins, and Cummins Heavy Duty protocols on one device, a future update for AutoCal V3 will enable license transfers between FlashScan and AutoCal V3 devices where the device license numbers match. AutoCal V3 can be used by tuners with FlashScan V3 (not yet available), FlashScan V2, or FlashScan HD.
AutoCal V3 User Guide is now available to assist both tuners and end-users. The AutoCal V3 label template is also available for tuners who wish to rebrand AutoCal.
Compatibility:
2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 RAM 2500, 3500 6.7L Cummins Diesel Pickups &
2013-2018 RAM 3500, 4500, 5500 6.7L Cummins Diesel Cab & Chassis
*Please note*
Our EFI Live tunes do not support PTO units, running our tunes may disable the PTO system, run at your own risk.
2019+ Rams are not SOTF and do not come with a CSP5 switch. Tunes include: Stock, 45HP, 70HP, and 100HP, changing tune levels requires using the AutoCal to switch tune levels.
Emissions:
DPF, DEF, Cat, and EGR systems are removed on all custom tunes. This is for off-road use only.
Features:
- Improved fuel economy
- Improved performance
- Custom tunes tailored tune files for your specific vehicle and modifications
- Read and clear DTC codes
- High-speed data logging
- Display data while logging
- Read & program calibration and operating system data of the engine controller
- Read/Flash AutoCal⇄Connected Vehicle between 30 seconds and 7 mins (vehicle dependent)
- Automatic saving of trace files
- Includes rotary switch to change tune levels
- Tune levels : 1) Stock power. 2) +65HP. 3) +100HP. 4) +130HP
**All EFI Live orders will take 3-6 business days to program before they are shipped. Be sure all information entered is exact, any misinformation given can result in delays. If you do not provide the full information requested your order will be canceled. This is a custom-tailored product and cannot be returned or canceled. Full detailed installation instructions are included, if you are not capable of installation please book your truck in with a local diesel shop to have them install it, we do not offer any tech support regarding the installation and flashing.**
Optional lock & key switches are available here.
$899.99
EFI Live Autocal V3 with custom tuning
With 512MB storage for tune and log files, and file transfer times up to 10 times faster than AutoCal V2, AutoCal V3 delivers significant hardware advancements to the tuning market.
AutoCal V3's built-in USB drivers, field upgradeable firmware, and custom menu system makes supporting remote customers a breeze.
Supporting GM, Dodge Cummins, and Cummins Heavy Duty protocols on the one device, a future update for AutoCal V3 will enable license transfers between FlashScan and AutoCal V3 devices where the device license numbers match. AutoCal V3 can be used by tuners with FlashScan V3 (not yet available), FlashScan V2, or FlashScan HD.
AutoCal V3 User Guide is now available to assist both tuners and end-users. The AutoCal V3 label template is also available for tuners who wish to rebrand AutoCal.
|
HP Ratings: Stock, +30HP, +65HP, +100HP, +130HP |
Compatibility:
2011, 2012, 2013, 2014 Chevy Silverado & GMC Sierra Duramax 6.6L LMM & LML
***If your specific truck has a manual Transfer Case it is not capable of the DSP tunes and will only come with one 50HP Tune file***
Some Cab & Chassis trucks will only come with one tune file.
*NOTE: If your truck is equipped with a manual transfer case it will not support the 5 tune DSP switch, it will only be capable of one +50HP tune file.
Emissions:
DPF, DEF, Cat, and EGR systems are removed on all custom tunes. This is for off-road use only.
Features:
- Improved fuel economy
- Improved performance
- Custom tunes tailored tune files for your specific vehicle and modifications
- Read and clear DTC codes
- High speed data logging
- Display data while logging
- Read & program calibration and operating system data of engine controller
- Read/Flash AutoCal⇄Connected Vehicle between 30 seconds and 7 mins (vehicle dependent)
- Automatic saving of trace files
- Includes rotary switch to change tune levels
**All EFI Live orders will take 3-6 business days to program before they are shipped. Be sure all information entered is exact, any misinformation given can result in delays. This is a custom-tailored product and cannot be returned or canceled. Full detailed installation instructions are included, if you are not capable of installation please book your truck in with a local diesel shop to have them install it, we do not offer any tech support regarding the installation and flashing.**
$799.99
EFI Live Autocal V3 with custom tuning
With 512MB storage for tune and log files and file transfer times up to 10 times faster than AutoCal V2, AutoCal V3 delivers significant hardware advancements to the tuning market.
AutoCal V3's built-in USB drivers, field upgradeable firmware, and custom menu system makes supporting remote customers a breeze.
Supporting GM, Dodge Cummins, and Cummins Heavy Duty protocols on the one device, a future update for AutoCal V3 will enable license transfers between FlashScan and AutoCal V3 devices where the device license numbers match. AutoCal V3 can be used by tuners with FlashScan V3 (not yet available), FlashScan V2, or FlashScan HD.
AutoCal V3 User Guide is now available to assist both tuners and end-users. The AutoCal V3 label template is also available for tuners who wish to rebrand AutoCal.
Compatibility:
2001, 2002, 2003, 2004, 2005, 2006, 2007, 2007.5, 2008, 2009, 2010 Chevy Silverado & GMC Sierra Duramax 6.6L.
Cab & Chassis trucks will only come with one tune file.
|
HP Ratings: Stock, +30HP, +65HP, +100HP, +130HP |
Emissions:
DPF, DEF, Cat, and EGR systems are removed on all custom tunes. This is for off-road use only.
Features:
- Improved fuel economy
- Improved performance
- Custom tunes tailored tune files for your specific vehicle and modifications
- Read and clear DTC codes
- High-speed data logging
- Display data while logging
- Read & program calibration and operating system data of engine controller
- Read/Flash AutoCal⇄Connected Vehicle between 30 seconds and 7 mins (vehicle dependent)
- Automatic saving of trace files
- Includes rotary switch to change tune levels
**All EFI Live orders will take 3-6 business days to program before they are shipped. Be sure all information entered is exact, any misinformation given can result in delays. This is a custom-tailored product and cannot be returned or canceled. Full detailed installation instructions are included, if you are not capable of installation please book your truck in with a local diesel shop to have them install it, we do not offer any tech support regarding the installation and flashing.**
Optional lock & key switches are available here.
$799.99
EFI Live Autocal V3 with custom tuning (4 tunes)
With 512MB storage for tune and log files and file transfer times up to 10 times faster than AutoCal V2, AutoCal V3 delivers significant hardware advancements to the tuning market.
AutoCal V3's built-in USB drivers, field upgradeable firmware, and custom menu system make supporting remote customers a breeze.
Supporting GM, Dodge Cummins, and Cummins Heavy Duty protocols on the one device, a future update for AutoCal V3 will enable license transfers between FlashScan and AutoCal V3 devices where the device license numbers match. AutoCal V3 can be used by tuners with FlashScan V3 (not yet available), FlashScan V2, or FlashScan HD.
AutoCal V3 User Guide is now available to assist both tuners and end-users. The AutoCal V3 label template is also available for tuners who wish to rebrand AutoCal.
Compatibility:
2007, 2008, 2009, 2010, RAM 2500, 3500 6.7L Cummins Diesel.
2007, 2008, 2009, 2010, RAM 4500, 5500 6.7L Cummins Diesel.
Emissions:
DPF, DEF, Cat, and EGR systems are removed on all custom tunes. This is for off-road use only.
Features:
- Improved fuel economy
- Improved performance
- Custom tunes tailored tune files for your specific vehicle and modifications
- Read and clear DTC codes
- High-speed data logging
- Display data while logging
- Read & program calibration and operating system data of engine controller
- Read/Flash AutoCal⇄Connected Vehicle between 30 seconds and 7 mins (vehicle dependent)
- Automatic saving of trace files
- Tunes include: Stock, Economy +30HP, Eco/Tow +65HP, Street +100HP, Max Power +130 HP.
- Includes rotary switch to change tune levels
**All EFI Live orders will take 3-6 business days to program before they are shipped. Be sure all information entered is exact, any misinformation given can result in delays. This is a custom-tailored product and cannot be returned or canceled. Full detailed installation instructions are included, if you are not capable of installation please book your truck in with a local diesel shop to have them install it, we do not offer any tech support regarding the installation and flashing.**
Optional lock & key switches are available here.
$899.99
EFI Live Autocal V3 with custom tuning
With 512MB storage for tune and log files and file transfer times up to 10 times faster than AutoCal V2, AutoCal V3 delivers significant hardware advancements to the tuning market.
AutoCal V3's built-in USB drivers, field upgradeable firmware, and custom menu system make supporting remote customers a breeze.
Supporting GM, Dodge Cummins, and Cummins Heavy Duty protocols on the one device, a future update for AutoCal V3 will enable license transfers between FlashScan and AutoCal V3 devices where the device license numbers match. AutoCal V3 can be used by tuners with FlashScan V3 (not yet available), FlashScan V2, or FlashScan HD.
AutoCal V3 User Guide is now available to assist both tuners and end-users. The AutoCal V3 label template is also available for tuners who wish to rebrand AutoCal.
Compatibility:
2010, 2011, 2012 RAM 2500, (3500 68RFE) 6.7L Cummins Diesel. - 4 Tunes
2010, 2011, 2012 RAM (3500 AISIN) 4500, 5500 6.7L Cummins Diesel. - Single +65HP Tune
Emissions:
DPF, DEF, Cat, and EGR systems are removed on all custom tunes. This is for off-road use only.
Features:
- Improved fuel economy
- Improved performance
- Custom tunes tailored tune files for your specific vehicle and modifications
- Read and clear DTC codes
- High-speed data logging
- Display data while logging
- Read & program calibration and operating system data of engine controller
- Read/Flash AutoCal⇄Connected Vehicle between 30 seconds and 7 mins (vehicle dependent)
- Automatic saving of trace files
- Tunes include: Stock, Economy +30HP, Eco/Tow +65HP, Street +100HP, Max Power +130 HP.
- Includes rotary switch to change tune levels
**All EFI Live orders will take 3-6 business days to program before they are shipped. Be sure all information entered is exact, any misinformation given can result in delays. This is a custom-tailored product and cannot be returned or canceled. Full detailed installation instructions are included, if you are not capable of installation please book your truck in with a local diesel shop to have them install it, we do not offer any tech support regarding the installation and flashing.**
$430.00
5 Tune Package for the SCT/Bully Dog BDX, X4, and LiveWire tuner
Includes 5 power levels.
2001-2019 6.7L Powerstroke and 2018-2020 3.0L Powerstroke only.
You have the option of purchasing the 5 tunes which can be loaded one at a time via the BDX device (sold separately), or purchasing the SOTF package which allows you to switch between multiple power levels without using the BDX. To run the SOTF tunes you will need to purchase a SOTF switch which is available separately HERE.
These are cloud tunes, once purchased, we will reach out to get the vehicle VIN and device serial number, we will then get the tunes created within 2 business days. You will need to download the tunes onto your device, they are not preloaded on devices.
Contact us if you need help.
