Ford Powerstroke 6.7L Tuning Information Commander 2020-2024

What You Need to Tune Your 2020-2021 Ford Powerstroke 6.7L Pickup:

Note: For 2022 models, you can either use a single tune file (+30HP) or swap to a 2021 ECM to enable SOTF tunes.

After receiving your parts, use the Commander to capture your ECM, TCM, and Cable serial numbers.

Please visit this page to submit your details

Submit the following details:

  • Order #
  • Vehicle VIN
  • Cable Serial #
  • ECM Serial #
  • TCM Serial #
  • [Only for pre-22 SOTF tunes] Idle choice (stock, rumble, or hiss)

Ensure you provide the correct serial numbers. ECM readings through OBD differ from direct ECM readings. If incorrect, you may waste your credits and need to buy additional credits. Please confirm the serials carefully.

Obtaining ECM serial numbers:

  • 2020-2021 Ford - Connect to the ECM connector, serial number starts with "40".
  • 2022 Ford Level 1 ECM (22 ECM only) - Connect to OBD port, serial starts with "37".
  • 2022 Ford (ECM swap only) - Connect to the 21 ECM connector, serial starts with "40".

Obtaining TCM serial numbers:

  • All years: Connect to the OBD port. Serial number starts with "59".

After providing your information using this submission tool , expect 3-5 business days for tune file creation and delivery.

While it's not mandatory, it’s advised to read your ECM before tuning. This ensures you have a backup of your stock file, which is essential for reverting to stock settings later on.

Leave a comment

Please note, comments need to be approved before they are published.