Sprinter DPF Delete Pipe | 2010-2025 Mercedes Sprinter 2500 / 3500
2019+
409 Stainless Steel
the popup
Sprinter DPF Delete Pipe | 2010-2025 Mercedes Sprinter 2500 / 3500
Sprinter DPF Delete Pipe | 2010-2025 Mercedes Sprinter 2500 / 3500
SKU: SKU:DPSS-SPRINT-19
Couldn't load pickup availability
Select your vehicle
Choose your vehicle to confirm this product fits your truck
Introduction
Free your Sprinter from restrictive emissions equipment with the Mercedes Sprinter 3.0L 3-inch DPF Delete Exhaust, designed for 2010–2025 Mercedes-Benz and Freightliner Sprinter 2500/3500 vans equipped with the 3.0L V6 diesel engine.
This complete Sprinter DPF delete kit removes the Diesel Particulate Filter (DPF), catalytic converters and related exhaust restrictions to improve exhaust flow, reliability and drivability for race-use applications.
The system supports early W906 exhaust designs (2010–2018) and revised W907 / W910 exhaust configurations (2019–2025). Mercedes updated the exhaust and turbo direct pipe in late 2018, so it is important to confirm which exhaust version your Sprinter uses before ordering.
This Sprinter DPF delete kit is available in T-304 or T-409 stainless steel. The material choice affects corrosion resistance and cost only, not performance or fitment. 409 versions include resonator mufflers.
Features
- Complete 3-inch DPF delete exhaust system for Mercedes Sprinter 3.0L V6 diesel
- Fits 2010–2018 (W906) and 2019–2025 (W907 / W910) exhaust designs
- Available in T-304 or T-409 stainless steel
- 3" OD, 16-gauge mandrel-bent tubing
- Factory-style mounting brackets to reduce added turbo stress
- Integrated flex pipe to handle heat and engine movement
- All clamps and hardware included
Benefits
- Removes restrictive DPF and catalytic converters
- Improves exhaust flow on tuned Sprinter 3.0L engines
- Supports better drivability under load
- Helps reduce exhaust backpressure
- Reduces long-term stress on the turbocharger
- Built for durability in off-road and work environments
Vehicle Fitment
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2010–2018 | Mercedes-Benz | Sprinter 2500 / 3500 | 3.0L V6 Diesel | Early exhaust design |
| 2010–2018 | Freightliner | Sprinter 2500 / 3500 | 3.0L V6 Diesel | Early exhaust design |
| 2019–2025 | Mercedes-Benz | Sprinter 2500 / 3500 | 3.0L V6 Diesel | Revised exhaust & turbo direct pipe |
| 2019–2025 | Freightliner | Sprinter 2500 / 3500 | 3.0L V6 Diesel | Revised exhaust & turbo direct pipe |
Early vs. Revised Exhaust
| W906 (2010–2018) | W907 / W910 (2019–2025) |
|---|---|
| Older exhaust routing | Revised exhaust routing and turbo outlet |
| Uses early-style downpipe | Uses updated turbo direct pipe |
| Requires early-style DPF delete kit | Requires late-style DPF delete kit |
Technical Specifications
Materials
- Material options: T-304 or T-409 stainless steel
- Tubing thickness: 16-gauge
Dimensions & Type
- Tube diameter: 3-inch OD
- System type: DPF delete / straight-pipe exhaust
What's Included
- DPF delete downpipe for Sprinter 3.0L
- 3" mid-pipe section
- 3" exhaust strap clamps
Installation & Notes
- Estimated install time: 3–4 hours
- Install time depends on tools and experience
- Vehicle lift is strongly recommended
- All clamps and adapters are included
Important Notes
- Disconnect SCR controller, NOx sensors, AdBlue injector, and DPF pressure/EGT sensors before tuning
- If the van has an active DEF countdown, idle mode, or emissions-related fault, Mercedes-specific diagnostic tools must be used to clear codes before tuning
- Failure to reset fault codes can cause limp mode or improper operation
Frequently Asked Questions
What is the difference between T-304 and T-409 stainless steel?
Both versions have the same fitment and design. T-304 offers higher corrosion resistance, while T-409 is a cost-effective option commonly used in exhaust systems.
Does this exhaust kit fit all 2018 Sprinter 3.0L vans?
Yes, but you must confirm whether the van uses the early or revised exhaust design, as both were used during that model year.
Is tuning required?
Yes. Race tuning is required for proper operation after DPF removal.
Disclaimer
Shipping Policy at Tuner Depot
At Tuner Depot, we understand the importance of timely delivery for your performance parts. We're committed to ensuring a seamless shipping experience, striving to dispatch your orders with utmost efficiency and speed.
Our Shipping Policy: Our aim is to dispatch all orders within two business days, providing you with a quick and efficient processing time. However, unforeseen circumstances beyond our control may occasionally impact shipping times.
Factors Affecting Shipping:
- Weather Conditions: Adverse weather conditions such as rain, snow, or sleet may affect delivery timelines. We will make every effort to minimize any delays.
- Holiday Periods: Please note that our shipping center will be closed during holidays. We will resume shipping promptly on the next business day. Allow for potential delays during peak seasons, but rest assured, we will keep you informed every step of the way.
- Staff Availability: Unforeseen circumstances can occasionally affect our staffing levels, possibly leading to minor delays. We are committed to swiftly resolving any issues to maintain our high standards of service.
We genuinely appreciate your understanding and patience during any unexpected obstacles. Be assured that we will utilize every resource available to deliver your performance parts promptly.
Warranty
Hardware components are covered by Tuner Depot's standard warranty. Tuning devices and software carry manufacturer warranty terms. Use of these products will void your vehicle's factory warranty. Please confirm with your manufacturer before installation.
Off-Road Use Only
These products are intended for off-road, race, and competition use only and may not be legal for use on public highways where emissions laws apply. Check your local and state regulations before purchase.
Upgrade Your Build
Frequently Added Together
-
Regular price From $880.00Regular price
