
Notified by email when this product becomes available
T304 Stainless Steel
The Purest Stainless Steel used in Exhaust System Manufacturing
High Rust Resistance
Lasts Up To 20+ years
Looks Better
T409 Stainless Steel
The Standard Stainless Steel used in Exhaust System Manufacturing
Low Rust Resistance
Lasts Up To 5-8 Years
Looks Dull
Attention
A 2022 Cummins Tune Package was added to your cart. This tune is a beta tune that may cause the following:
- Low power
- Poor fuel mileage
- Engine codes that may appear
- Poor shifting characteristics
For a tested and proven tune, please view our Ram Cummins 6.7L All-in-One DPF/DEF/EGR Delete Kit w/ECM Swap (2022-2024)
Introduction
The Ford 6.7 Powerstroke Delete Kit (2011–2019) is built for owners who want a clean, year-correct off-road delete solution without guessing which parts work together. This 6.7 Powerstroke delete kit includes the correct EGR valve and cooler delete hardware for your truck, your choice of race exhaust and a Mini Maxx V2 tuner with custom delete tuning preloaded for the exact model year selected.
The goal is simple: tune the truck, remove the failure-prone emissions hardware and end up with a setup that runs cooler, pulls harder and stays consistent under load especially when towing.
Compatibility
| Year Range | Make | Model | Engine |
|---|---|---|---|
| 2011–2014 | Ford | F-250 / F-350 | 6.7L Powerstroke |
| 2015–2016 | Ford | F-250 / F-350 | 6.7L Powerstroke |
| 2017–2019 | Ford | F-250 / F-350 | 6.7L Powerstroke |
Please Note: Pickup truck applications only
Technical Specifications
| Specification | Detail |
|---|---|
| Tuner Included | Mini Maxx V2 handheld tuner |
| Tuning Type | Custom-built delete tuning, year-specific |
| Exhaust Diameter | 4-inch (full exhaust option) |
| Exhaust Options | DPF race delete pipe or full 4" race exhaust |
| Exhaust Material | T304 stainless steel or T409 stainless steel |
| EGR Configuration | Year-specific EGR valve and cooler delete hardware |
| Power Increase | Tune-dependent |
| Operating Characteristics | Lower sustained EGTs vs. stock when tuned |
Exhaust options
- Powerstroke 6.7 Delete Pipe: Replaces the factory DPF section for maximum exhaust flow
- 4" Exhaust System: Full 4" race exhaust designed for the lowest backpressure
Material Options (F-250 / F-350 Delete Kit)
- T304 Stainless (Premium): Highest corrosion resistance and long-term finish
- T409 Stainless (Economy)): Structurally durable and cost-effective; may discolor over time
Year Specific PowerStroke EGR Delete Kit Components
2011–2014 Powerstroke 6.7 EGR Kit
| Part Name | Quantity |
|---|---|
| 3/8" Hose Barb | 1 |
| Hose Clamps | 1 |
| L-shaped Metal Bracket | 1 |
| Socket Bolts | 5 |
| Coolant Block-Off Plate | 1 |
| Exhaust Block-Off Plate | 1 |
| Zip Ties | 3 |
| Intake Block-Off Plate | 1 |
| Heater Hose | 1 |
| Vacuum Cap | 1 |
| Pressure Sensor Plug | 1 |
2015–2016 Powerstroke 6.7 EGR Kit
| Part Name | Quantity |
|---|---|
| 3/8" Hose Barb | 1 |
| Hose Clamps | 1 |
| L-shaped Metal Bracket | 1 |
| Socket Bolts | 5 |
| Coolant Block-Off Plate | 1 |
| Exhaust Block-Off Plate | 1 |
| Zip Ties | 3 |
| Intake Block-Off Plate | 1 |
| Heater Hose | 1 |
| Coolant Hose | 1 |
| Vacuum Cap | 1 |
| Pressure Sensor Plug | 1 |
2017–2019 Powerstroke 6.7 EGR Kit
| Part Name | Quantity |
|---|---|
| 3/8" Hose Barb | 1 |
| Hose Clamps | 1 |
| L-shaped Metal Bracket | 1 |
| Socket Bolts | 5 |
| Coolant Block-Off Plate | 1 |
| Exhaust Block-Off Plate | 1 |
| Zip Ties | 3 |
| Intake Block-Off Plate | 1 |
| Vacuum Cap | 1 |
| Pressure Sensor Plug | 1 |
Key Features & Build Details
- Mini Maxx V2 Tuner – Supplied with preloaded custom delete tuning calibrated to the exact model year to prevent communication issues and drivability problems.
- Year-Correct EGR & Cooler Delete Hardware – Eliminates emissions components using parts matched specifically to 2011–2014, 2015–2016 or 2017–2019 trucks.
- Race Exhaust Configurations – Choose a straight DPF delete pipe or a full 4" exhaust to reduce restriction and heat buildup.
- Stainless Steel Construction – T304 stainless for maximum corrosion resistance or T409 stainless for durable, cost-effective performance.
- Direct-Fit Design – Built specifically for 6.7L Powerstroke pickup trucks to avoid clearance and hanger issues.
Performance Benefits
- Lower EGTs Under Load – Reduced backpressure helps control exhaust temperatures during towing and heavy use.
- Improved Throttle Response – Calibrated tuning and freer exhaust flow improve drivability.
- Consistent Power Delivery – Eliminates emissions-related derates and heat soak issues.
- Reduced Soot & Heat Stress – Removing EGR components minimizes internal contamination and thermal load.
- Potential Fuel Economy Improvement – Proper calibration may improve efficiency depending on driving conditions.
Installation Notes
Installation difficulty is considered moderate and requires basic mechanical skills and standard hand tools.
Some exhaust systems may require cutting the factory exhaust for removal or fitment, so wheelbase and hanger locations should be verified before final tightening.
After installation, clamps and connections should be rechecked after the first heat cycle and the system inspected for leaks. The vehicle must be tuned before deleting any emissions components.
This kit is intended for off-road and competition use only. Compliance with local, state and federal regulations is the responsibility of the purchaser.
Please Note: Pickup truck applications only. Wheelbase should be verified when selecting a full 4" exhaust system.
Frequently Asked Questions
Q: Do I tune before or after installing the powerstroke egr delete hardware?
A: Tune first. Load the delete tune, confirm proper communication and no DTCs, then proceed with the physical delete.
Q: How do I select the correct Powerstroke 6.7L configuration for my truck?
A: Choose your model year range, then select either the delete pipe or full 4" exhaust, followed by T304 or T409 material. The correct EGR and cooler delete hardware is included automatically.
Q: What is the difference between T304 and T409 stainless steel?
A: T304 provides superior corrosion resistance and long-term appearance. T409 is structurally strong and lower cost but may surface discolor over time.
Q: Will this kit work on a 2018 Ford F-350 6.7L Powerstroke?
A: Yes. Select the 2017–2019 option to receive the correct hardware and tuning for a 2018 F-350 pickup.
Q: Is this kit legal for street use?
A: This kit is designed exclusively for off-road and competitive applications.
Please note: The vehicle must be tuned without codes prior to any emissions system removal or modifications. Failure to follow instructions may cause damage to the ECM or void warranty coverage. It is the buyer’s responsibility to ensure adherence to all applicable local, state and federal laws.
Important Product Information
Off-Road Use Only: The products sold on this website are intended for off-road use only, and may not be legal for use on public highways where pollution control laws apply.
Check Local Laws: Before purchasing and installing any of these parts, please check your local and state laws to confirm whether the modifications are legal in your area.
Professional Installation Recommended: These kits and parts are strongly recommended to be installed by professional mechanics only. Improper installation may lead to performance issues or damage to your vehicle. Unless specified differently on the product page, our parts do not include installation instructions. They are intended for individuals with a proficient understanding of mechanical systems and procedures. Like many aftermarket parts compatible with a variety of vehicles, minor adjustments or modifications may be necessary during the installation process. We cannot accept returns or offer refunds on the basis of an inability to complete the installation due to the absence of instructions.
Warranty: The use of these parts will void the warranty of your vehicle. Please confirm with your vehicle manufacturer before purchase and installation.
No Liability: Tuner Depot is not responsible for any damage or issues that may arise from the use of these parts.
Product Images: Product images are for illustrative purposes only and may differ from the actual product due to manufacturer design changes or improvements.
No Performance Guarantees: While these parts are designed to enhance the performance of your vehicle, no guarantees are made regarding the specific performance gains that will be achieved.
Shipping Policy at Tuner Depot
At Tuner Depot, we understand the importance of timely delivery for your performance parts. We're committed to ensuring a seamless shipping experience, striving to dispatch your orders with utmost efficiency and speed.
- Weather Conditions: Adverse weather conditions such as rain, snow, or sleet may affect delivery timelines. We will make every effort to minimize any delays.
- Holiday Periods: Please note that our shipping center will be closed during holidays. We will resume shipping promptly on the next business day. Allow for potential delays during peak seasons, but rest assured, we will keep you informed every step of the way.
- Staff Availability: Unforeseen circumstances can occasionally affect our staffing levels, possibly leading to minor delays. We are committed to swiftly resolving any issues to maintain our high standards of service.
- Choosing a selection results in a full page refresh.








