How to unlock & Tune your FACTORY ECM - L5P AIO Delete Kit
READ EVERY STEP BEFORE YOU MAKE ANY MODIFICATIONS TO YOUR TRUCK.
YOU DO NOT NEED THE TDN APP, FOLLOW THE INSTRUCTIONS BELOW
Start with all emissions installed and functioning without codes or error messages. Be sure the DEF level is not low. On 17-19 model years you must make sure the soot levels are below 70% before proceeding.
The process can only be started after you receive your order.
You will need to install VCM Suite BETA software. Always verify you have the latest BETA version whenever you open the software as it updates regularly.
Important Notes:
- ALWAYS use a battery charger capable of supplying a STEADY 10 AMPs or more.
- When opening VCM software, it may open the last file used. Always close the file when opening VCM software (top left Folder icon).
- The current VCM Suite Beta software requires a certain version of .NET. If you get errors, check your .NET version or update it from the HP Tuners Downloads section.
- If emissions were unplugged before tuning, you will likely get a Service Emissions message. If the DEF tank was low when you started, you may get a Low DEF light after tuning. Ensure the DEF tank is at least 1/4 full.
- On 17-19 model years, ensure the soot levels are below 70%. If above 70%, a forced regen is required before tuning.
